PlasticWeld is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld combines to a tensile strength of 3200 PSI and cures to an off-white color. Use on: Automotive Ceramic Epoxy and Adhesives Fiberglass Plastic/Composite/PVC And more Instructions 1. Prepare: Clean repair area of dirt, grease, oil, paint, rust, etc. 2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly. 3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed. 4. Dry: Sets in 5 minutes. Cures in 1 hour. If temperature is below 40 degrees fahrenheit, then set time is longer.
Off-white drying epoxy sets in 5 minues and cures in 1 hour
Great for most hard plastics, ABS, fiberglass, pvc, glass, vinyl and most composites
Tensile strength of 3200 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won’t dry out
J-B Weld is proudly made in the USA